els
中文版
Favorite
 
原网站保留产品
Контроллер RED4 EDC для электронных рядных ТНВД ZEXEL
Source:本站 Hits:2861 Font size:Big In Small

 

 

EDC - Zexel RED4 Eletronic control In-line pump

Данный продукт может урегулировать все прямые насосы с электрическими регуляторами скорости, изготовленные ябоннской компанией Джексэн. В продукте устонавленны широкопроводный выключательный источник тока, чипы, управленные АМР7 с высокой скоростью и интегральная смеха, поэтому можно выполнить все урегулированные фонкции RED4. Данный продукт обладает высокой интеграцией, надежной характеристикой и является сравнительно подходящим регулирующим прибором в ностоящее время по электронному регулятору скорости RED4
 
1. Technical Data
1. Eletronic Power: 220V 50HZ
2. Output Power: <200 W
3. Data display: Light Four digital Nixietube
4. Control Range: 5%-95%
5. Precision : ±0.1%
6. 4 Pre-set : 5%, 16.25%, 72.5%, 95%
 
2. Button Instructions:
 1. “ Select” Button: When the corresponding indicator light turns off, press “↑” “↓”button to adjust PWM value “5%-95%”; while the corresponding indicator light turn on, press “↑” “↓”button to choose 4 kinds of pre-set : 5%, 16.25%, 72.5%, 95%
 
     2. “ RED4 POWER”: The Oil ajusting speed device switch, when it light effective.
     3. “ Limp home” Fixed speed switch, while the lamp light, PWM value is “95%”
     4. “ Pull Down” switch, When the lamp light, PWM value is “5%”
     5. “ Menu” “ Enter” Menu Operating: it can change the controller and run the programm. Before left factory, all the data have pre-set well, don’t change it by any way, and leads to abnormal usage.
    
3. Usage Instructions:
Connect the oil pump adjusting speed device through the cables along with test EDC itself, Open the power switch, then open “ RED4 Power”, the corresponding indicator lamp will be light,  display will show “ 00.00”, it can adjust the throttle up and down through the arrow “↑” “↓”. Close the “ RED4 POWER’  switch, oil pump power off.
 
   Press “ Select” button, indicator lamp light, and press arrow “↑” “↓” to choose pre-set rank, and press “ select” button again, indicator lamp power-off,
Then reback to the original situation.
   Under the situation “ Select” light powe-off, press “ pull down” output value is “95%”, press “ Limp home”, controller output value will be “ 5%”.
 
 


§Quick Links
·OUR PRODUCTS
·OUR TOOLS
·CONTACT
·ORDER
·LEAVE WORD
Recommended Products
ADDRESS:
Tianyuan street Economic Development Zone
Taian city Shandong province China
TEL:  
86-538-6627598 (Selling Department)
86-13468015600 (YE)
FAX:
86-538-6627668

TAIAN NANTAI EXPERIMENTAL EUQIPMENT CO.,LTD
NANTAI AUTOMOTIVE TECHNOLOGY CO.,LTD
Copyright(c) 2004 nantai-china.com All rights reserved.