English
中文版
العربية
Favorito
productos
precio
Contenidos
Pedidos
Fin
NT-3000
12PSB
NT2000
NT2001
PJ-40
PQ-400 Nozzle Tester
 productos
CRS200 common rail system tester
hits:1877

CRS200 common rail system tester

 

CRS200 common rail system tester

The function of the tester for CR high pressure pumps is to provide the desired signal to drive the solenoid in the pump being tested. CR2000 common rail Tester can used for testing following pumps: BOSCH CP1CP2CP3DELPHI SIEMENS, DENSO HP2 AND HP3. It has the functions to test the Electromagnetic injectors.
It also can test 6 common rail injectors in one time.
Design Features
*  Modulated driving signal to ensure the safety of the solenoid of the CR pump
*  Adjustable duty cycle for the driving signal
*  Short circuit protection for the output circuitry of the solenoid driving signal
*  Measure and LCD display rail pressure
*  To test if the CR injector is still function, To connect a CR injector to a high pressure fuel source by a high pressure fuel line and to the CR tester by harness. The tester is set to continuous injection mode. The CR injector is in normal condition, if it is capable to inject fuel under the driving signals by the tester.
*  To test injector spray atomization, To connect a CR injector to a high pressure fuel source by a high pressure fuel line
and to the CR tester by harness. The tester is set to single injection mode to allow observing the nozzle spray pattern to judge if the nozzle is normal or orifice plugged.
*   Checking the Injectors return oil and injection oil.
CHINA NANTAI TESTING EQUIPMENT CO., LTD.
  Copyright(c) 2004 nantai-china.com All rights reserved.