TEST BENCH
- Diesel Fuel Injection Pump Test Bench
- Common Rail injector test bench
- Common rail injector and pump test bench
- EUP/EUI tester/cam box
- NOZZLE TESTER
- Common rail injector stage 3 tools
- EDC Tester( Electronic Diesel Controller)
- Injectors, Pump & Spare Parts
- PT Cummins Pump and Injector Test Bench
- CATPILLAR HEUI tester
- Tester
- Accessories of Test bench
- Micro-hole extrusion grinding machine
- Diagnostic Scanner
- Gasoline Injector diganostic and cleaner
- Turbo Balance Machine
Common rail injector stage 3 tools
CR3-A (CRM900) COMMON RAIL INJECTOR STROKE MEASURING TOOLS
Common Rail Injector stroke measuring system, which includes almost all common rail injectors stroke measuring standard data inside. Suitable for BOSCH, CAT, DENSO, DELPHI, SIEMENS injectors and so on .
It can test:
1. Adjust Needle Lift
2. Adjust Needle Opening Pressure
3. Adjust Total Lift of Armature Assembly
4. Adjust Actual Lift of Armature Assembly
5. Adjust Solenoid Air Gap
6. Adjust Solenoid Spring Compression
7. Driving Armature
Common Rail Injector Repair Stage 3 Rebuild Injector after Component Being Replaced:
Injector Critical dimensions are accurately controlled by using the calibration shims or spacers of exact thicknesses in the injector during injector rebuild to meet Bosch spec tolerance of 1um.
1:Intuitive, step-by-step instruction to direct user to rebuild injector
Measure thickness of calibration shims
Measure dimension of injector components
Provide the required thickness of calibration shims
2:Complete database to cover Bosch common rail injectors
CRI 1, CRI 2, CRI 3 for Automotive engine
CRIN 1, CRIN 2 for Commercial vehicle engine
- PrevCR3-C( CRM100) THIRD STAGE TESTE...
- NextNo！